Just received your machine?

Descaling Procedure

Baking Soda

  1. Empty the tank.
  2. Mix 1 ½ ounces of baking soda with one quart of distilled water.
  3. Fill the empty tank with this mix.
  4. Tighten the cap and allow the unit to heat up and stay warm for 1 to 2 hours.
  5. Run the unit for about one minute, turn off and unplug the power cord and allow the unit to cool, usually about for 3 to 4 hours.
  6. Remove the drain plug and empty the tank.
  7. Flush the tank as many times as necessary to remove all debris in the tank.
  8. Reinstall the drain plug.


  1. Remove the drain plug on the bottom of the unit.
  2. Mix together a solution of ½ distilled vinegar & ½ distilled water.
  3. Using the funnel, fill the water tank with this solution.
  4. Turn on the unit, allow it to heat up and steam out about ½ of the mixture.
  5. Turn off the unit and let it rest for 30 minutes.
  6. Repeat this process until the steam flow returns to normal (could be 2 to 3 times). NOTE: there is an odor associated with this process.