Service Information
Each machine is provided with an input electrical cord similar to the one shown.
Each machine has this wiring configuration:
The Customer is to provide their own plug to match their electrical power outlet.
The power cord wire is connected to the heater fuse block within the unit.
CAUTION: If the pump runs backwards (DAMAGE WILL OCCUR), change two wires in the power cord to correct the problem immediately as this can cause damage to the pump.
| Green Wire: | Ground |  |
| White Wire: | Neutral | |
| Black Wire: | L1 | |
| Red Wire: | L2 |
The Customer is to provide their own plug to match their electrical power outlet.
The power cord wire is connected to the heater fuse block within the unit.
CAUTION: If the pump runs backwards (DAMAGE WILL OCCUR), change two wires in the power cord to correct the problem immediately as this can cause damage to the pump.